Beretta Alley Cat (Tomcat w/ XS dot night sights) Pistol model 3032

Since 09-07-06

as manufactured by Beretta U.S.A.

 Your Web-Master owns a Beretta Alleycat
 

The hard to find Grip tool to remove the Grip screws:

Here is information your web-master obtained on the tools from http://brownells.com

From: Niesje Licht [mailto:niesjel@brownells.com]
Sent: Thursday, September 07, 2006 5:48 AM
Subject: RE: How long and heavy is the #080-451-007 screwdriver?

The total length is 6&5/16” and weight is 0.21 lbs. I have incorrectly quoted the shipping rate on this item. It should be $4.25.

Jon Wittwer

Technical Support Gunsmith

Brownells, Inc.

From: web master
Sent: Wednesday, September 06, 2006 10:43 AM
To: Niesje Licht
Subject: How long and heavy is the #080-451-007 screwdriver?

Hello, Jon:

Thank you for your reply!

How long and heavy is the #080-451-007 screwdriver?

From: Niesje Licht [mailto:niesjel@brownells.com]
Sent: Wednesday, September 06, 2006 7:29 AM
Subject: RE: no reply to my first email on 210-3 flat head bit or screwdriver for Beretta 3032 Alleycat grip screws

We have just the bit, which is #080-210-330, the price is $2.92. We also have a fixed blade screwdriver that is #080-451-007, the price is $10.69. The shipping on the bit would be $4.25 and the screwdriver would be $4.25.

Jon Wittwer

Technical Support Gunsmith

Brownells, Inc.

From: web master
Sent: Tuesday, September 05, 2006 2:48 PM
To: Niesje Licht
Subject: RE: no reply to my first email on 210-3 flat head bit or screwdriver for Beretta 3032 Alleycat grip screws

Hello, Jon:

The 210-3 flat head bit size was given to by the Firearms dealer who personally owns and fires a Beretta Tomcat 3032 pistol.  He has the complete gunsmith tool kit and actually tried several bits to find the one that fits the grip screws on my Alleycat.  That tool was labeled 210-3.

Do you have a single flat blade screwdriver that will work?

Or do you have a flat head bit and driver of that size that will work? 

I prefer the smallest tool that I can obtain.

Please provide purchase price and shipping cost.

I look forward to you reply soon.  I still have not test fired the pistol since I got it new several weeks ago.  I am still getting all the tools/supplies to clean the weapon.

Thank you for your quick reply.

From: Niesje Licht [mailto:niesjel@brownells.com]
Sent: Tuesday, September 05, 2006 12:13 PM
Subject: RE: no reply to my first email on 210-3 flat head bit or screwdriver for Beretta 3032 Alleycat grip screws

The size of the 210-3 bit is .210 diameter and the thickness of the blade is .030. If these dimensions match your screw dimensions, then this would be the proper bit.

Jon Wittwer

Technical Support Gunsmith

Brownells, Inc.